RCA RCU404 - Manual (Page 10)

10
1 2 3
4 5 6
7 8 9
0
1. Press and hold the CODE SEARCH
key until the indicator light illuminates.
Then release the
CODE SEARCH key.
2. Press and release the component
key that matches the component’s
code you are retrieving (
TV , VCR , or
DBS•CABLE ). The indicator light
blinks once and then remains lit.
Note: For DVD or AUX, Press
DVD•AUX , then the component key
corresponding to the component stored
under the
AUX key. For DVD, press
DVD•AUX , then the VCR key. For an
auxiliary component, press DVD•AUX ,
then the corresponding component
key (
TV , VCR , DBS • CABLE ).
3. Press and release the CODE SEARCH
key. The indicator light turns off.
4. Starting with 0 on the keypad, press
the number keys in order (0-9) until
the indicator light blinks.
If you used one of the Code Search methods to program
your remote, follow the steps below to find out which code
is compatible with your component. Finding the actual code
and writing it down will save you time if you ever need to
program the remote again (e.g., if programming is lost when
you change the batteries).
INDICATOR
LIGHT
(OFF)
CODE
SEARCH
CODE
SEARCH
Code Retrieval
(BLINK)
Note: For DVD or AUX, Press
DVD•AUX , then the component key
corresponding to the component
to be stored under the
AUX key. For
DVD, press DVD•AUX , then the VCR
key. For an auxiliary component,
press
DVD•AUX , then the
corresponding component key
(
TV , VCR , DBS • CABLE ).
4. Aim the remote at the component
and press the ON•OFF key once.
The remote automatically sends every
code for the specified component
one at a time, with a 3 second delay
between each code. Keep the remote
aimed at the component throughout
the process.
5. As soon as the component turns
off, you must press the ENTER key
immediately so the remote stores
the correct code. If you don’t press
ENTER within 3 seconds, the remote
will send the next code in the list, and
you will have to start over from step 2.
6. Use Code Retrieval to identify the code
for your component for future reference.
ENTER
ON•OFF
(BLINK)
RCU404_US_IB_REVB 7/16/03 15:34 Page 10