Battery installation and information, 4 component universal remote key descriptions – RCA RCU404 User Manual

Page 3

Battery Installation
and Information

Your universal remote requires two AAA Alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:

1. Remove the battery compartment cover.

2. Insert the batteries, matching the

batteries to the (+) and (–) marks
inside the battery compartment.

3. Press and push the battery cover

back into place.

Note:

Reprogramming may be

required after batteries are replaced.

Congratulations on your purchase of the 4 component
universal remote by RCA. This universal remote controls
up to four electronic components and makes juggling remote
controls a thing of the past. You can program this RCA
universal remote to operate most models of most brands of
infrared, remote-controlled components manufactured after
1990. (See the enclosed Code List for a complete list of brands).
The 4 component universal remote is easy to use, easy to
program and gives you control at the touch of your fingertips.

Note:

The 4 component universal remote is already

programmed to operate most RCA, GE and PROSCAN
branded TVs, VCRs, DVD players and satellite receivers (DBS).
Just press the corresponding component key—

VCR

for a VCR;

DVD•AUX

for a DVD player;

for a television;

DBS•CABLE

for a satellite receiver or a cable box.

4 Component
Universal Remote

Key Descriptions

Component keys (

DVD•AUX

DBS•CABLE

VCR

): selects the component you

want the remote to operate.
For example, after you’ve programmed
the remote to operate your TV, you must
press the

key first to put the remote in

TV Mode. While in TV Mode, the

CHAN

keys change the channel on the TV, the

VOL

keys adjust the TV’s volume, etc.

Transport keys–

REW

(Rewind),

PLAY

(Fast Forward),

PAUSE

STOP

: operate

the same as your original VCR or DVD
remote control, although key labels may
vary (

REVERSE

FORWARD

RCU404_US_IB_REVB 7/16/03 15:34 Page 3