Rinnai RHFE-431WTA - Manual (Page 3)

FEATURES OF THE RHFE-431WTA UNITS
SAFETY DEVICES
– 1 –
◆ Clean Heating Forced Flue Type
◆ Easy Operation One-Touch Ignition
◆ Sensible Temperature Control Feature
◆ Comfortable Room Temperature Control and Display
◆ Warm Air Outlet at Floor Level (Keeps Your Feet Warm)
◆ Child Safety Function Lock
◆ Room Temperature Setting Memory
◆ Dirty Air Filter Indicator Lamp
◆ Energy-Saving Economy Setting
◆ Humidifier Tray
◆ Air Flow Directional Louvers
◆ Direct Vent Easily Installed
◆ Proportional Heating Variable Capacity
◆ Hush! Quiet Operation
◆ Modern Design Minimizes Floor Space Requirements
◆ Failure Message Display
◆ Timer Override Mode
Spark Safety Device: Automatically shuts unit down when there is an abnormal spark at time
of ignition.
Flame Failure Device: Activated when burner flame fails. This prevents raw gas from being
released.
Overheat Switch: This device automatically cuts the gas off if the heater exceeds a
predetermined temperature. This is normally caused by an
obstruction in front of the louvers, or a blocked fan filter.
Fusible Links: Backs up the overheat switch. If the fusible link cuts the unit off, a
service call by an authorized person is required to replace the link.
Overcurrent Prevention Device: This is a 3 amp. glass fuse found on P.C. board. Design
to shut unit down in case of overcurrent. If fuse blows all
indicator lamps will be "OFF".
Power Outage Safety Device: This safety device cuts off gas passage and stops
operation.