Rinnai RHFE-431WTA - Manual (Page 26)

– 24 –
1
2
3
4
5
SETTING THE CLOCK
TO OPEN THE CONTROL PANEL
Lift lightly in the center of the lid. The control
panel lid will then drop backward to an angle.
Note: When the appliance is first
plugged in or after a power failure
longer than 24 hours the display
will show “PF”.
SETTING THE CURRENT TIME & DAY
(This example shows setting the clock to 8:20am on Saturday).
DAY OF THE WEEK
Press the “Clock” button
once. The day of the week
and is
displayed.
Press either of the “ ” or “ ”
buttons until the correct day of
the week is displayed.
Press the “Select” button once
to lock in and complete day of
the week selection. The time of
day will then flash.
TIME OF DAY
To set the time press the “ ”
or “ ” buttons until the correct
time of day is displayed.
Pressing either button once will change the time in single minutes.
Holding eigther button down will change the time rapidly, first in minutes, then in hours.
CONFIRM SETTINGS
Press the “Select”or “Clock”
button once to lock in and
complete setting the time.
The
indicators will go out. Select
Clock
Select
Clock
Select
Clock Mo
Programming
Clock Select Timers
Select
Clock Sa
Programming
Clock Select Timers
am
Select
Clock Sa
Programming
Clock Select Timers
am
Select
Clock Sa
Programming
Clock Select Timers
am
Sa
Programming
Clock Select Timers