Radio Shack 43-3577 - Manual (Page 21)

21
Memor
y Dialing
7. Use the number keys to enter the name. See “Character Chart” on page 19.
8. When finished, press SELECT. The screen displays the
stored number.
9. Use the number keys to enter the number.
Press REDIAL to enter a pause in the dialing sequence. The display shows
a
P
.
10. Press SELECT. If you’ve changed the name or number, a confirmation
displays.
11. Select
Yes
.
12. Press SELECT. A confirmation tone sounds.
Memory X Stored
shows on the
display.
13. Press MEM to return to standby mode.
Delete an Entry
1. Press MEM,
Select Memory
is displayed.
2. Press RING/VOL +/– or (0–9) to select the memory
location you want to delete.
3. Press SELECT. The stored number displays.
4. Press SELECT again.
5. Select
Delete Memory X
.
6. Press Select.
Delete memory X
? appears.
7. Select
Yes
to delete or
No
to exit.
8. Press Select. If you selected
Yes
, a confirmation
tone sounds and display shows
Memory X Deleted
.
If you selected
No
, the display shows a list of
memory dialing locations.
9. Press MEM to return to standby mode.
Edit Memory 1
g
Delete Memory 1
Go Back
Delete Memory 1?
g
Yes
No