Radio Shack TAD-733 - Manual (Page 15)

15
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for special
services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH to answer an incoming call
without disconnecting the current call.
Press
FLASH again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
USING MUTE
The MUTE button on the handset lets
you talk to someone else in the room
without the person on the other end of
the phone line hearing your conversa-
tion. Press
MUTE during the call. The
LOW BATT indicator on the handset
lights.
Press MUTE again to resume your
phone conversation.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure T/P is set to P .
2. Lift the handset and press TALK .
3. Dial the service’s main number.
4. When the service answers, press .
Any additional numbers you dial are
sent as tone signals.
5. After you complete the call, return
the handset to the base or press
TALK on the handset. The phone
automatically resets to pulse dialing.
43-733.fm Page 15 Friday, September 17, 1999 8:57 AM