Correcting notes one by one (note edit), Modifying the tone changes in a song (pc edit), Saving the notation data in bmp format – Roland HPi-7LE User Manual
Page 52: P. 52

52
Convenient Functions
Correcting Notes One by One (Note
Edit)
You can make corrections in a recorded performance one note at
a time. This process of making changes in individual notes is
called “note editing.”
• You can make these corrections by using note editing:
• Deleting misplayed notes
• Changing the scale of a single note
• Changing the force used in playing a single key
(velocity)
• Change the fingering.
fig.e-note
The note-location display uses “Measure: Beat: Tick” as the
format. A tick is a unit of time that’s shorter than a beat.
Use the [
] [
] buttons to select the part with the note to be
edited. The Part number appears at the top of the screen.
Use the [
(Bwd)] button and the [
(Fwd)] button or use
[
] [
] buttons to find the note to be corrected.
When you’ve found the note you want to correct, use the [
]
[
] buttons to select “Pitch” or “Velocity,” or “Fingering” for
the note.
Use the [-] [+] buttons to correct the pitch or velocity. If you want
to delete the note, press the [
(Delete)] button.
Modifying the Tone Changes in a Song
(PC Edit)
In some songs, the instrument sound changes during the course
of the song (that is, the Tone changes in the middle of a Part). In
such songs, an instruction to switch the Tone is inserted at the
place where you want the sound to change. This instruction is
called a “Program Change” (PC), and actions such as deleting
program changes, or changing the selected Tone by them are
called “PC editing.”
It is not possible to insert a program change into a measure or
beat that does not contain a program change.
fig.d-e-pc
The PC-location display uses “Measure: Beat: Tick” as the
format. A tick is a unit of time that’s shorter than a beat.
Use the [
] [
] buttons to select the part with the program
change to be edited.
The Part number appears at the top of the screen.
Use the [
(Bwd)] button and the [
(Fwd)] button or use
[
] [
] buttons to find the program change to be edited.
When you’ve found the Program Change you want to modify,
select “Tone Name” on the screen.
Press a Tone button to select a Tone group, then select a Tone
with the [-] [+] buttons. When selecting Part 10 or 11, select the
drum set or effect sound.
If you want to delete the Program Change, press the
[
(Delete)] button.
Saving the Notation Data in BMP Format
You can take notations that are displayed on the HPi-7 and save them to floppy disks. You can also use
saved image data to your computer.
*
You cannot save copyrighted song data.
*
Other than for your own personal enjoyment, use of the notations that are output without the permission of the copyright
holder is prohibited by law.
1
Insert the floppy disk onto which you want to save the image data in the HPi-7’s disk drive.
Use a floppy disk formatted on the HPi-7.
For more on formatting disks, refer to p. 41.
HPi-7_e.book 52 ページ 2005年1月18日 火曜日 午後4時39分