RCA VR688HF - Manual (Page 28)

26
Playing a Tape
Operating Instructions
To Play a Tape
1 . Turn on the TV and tune it to channel 3, 4, or TVÕs video input
to see the picture from the VCR.
2 . Insert a tape in the VCR.
VCR automatically turns on. The cassette-in ( ) indicator
lights, and the VCR indicator lights if the Auto TV/VCR feature
is set to ON. The tape automatically begins playback if the
safety tab on the cassette has been removed and the auto play
feature is turned on.
3 . Press PLAY, if necessary. PLAY appears in the VCRÕs display
panel.
4 . Press TRACKING up or down to remove any streaks from the
picture, if necessary. Details are on page 31.
5 . Press STOP.
6 . Press REW on the remote or turn the shuttle ring toward REW
on the VCR.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER and the VCR will turn off after rewinding.
7 . Press EJECT on the VCR to eject the tape once it is completely
rewound.
PLAY
STOP
PAUSE
RECORD
POWER
EJECT R E W F W
D
Safety Tab