RCA VR688HF - Manual (Page 21)

19
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
Setting Up the VCR
14. Set Auto TV/VCR feature.
If you used one of the basic hookups and did not
connect the audio/video jacks of the VCR to the
TV, leave the Auto TV/VCR feature set to ON.
If you have connected your VCR using the
audio/video input of your TV, you can prevent the
VCR
indicator from turning on automatically and
interrupting the cable or antenna signal to your
TV.
A . Press MENU•PROG on remote to see VCR
MAIN MENU on the TV screen.
B . Press 6 to display PREFERENCES.
C . Press 3 to select Auto TV/VCR: ON or OFF.
¥ Select ON if you used one of the basic
hookups and watch your VCR on channel 3
or 4 of your TV. The VCR will auto-
matically switch the TV¥VCR setting to
VCR every time the VCR is turned on, a
tape with the safety tab removed is inserted,
or you press PLAY.
¥ Select OFF if you used one of the advanced
hookups and watch your VCR on the video
input channel of your TV. The VCR
indicator will not turn on automatically and
the signal from your antenna or cable to
your TV will not be interrupted.
Pressing TV•VCR on the remote will still
turn the VCR indicator on or off and switch
the antenna signal.
Startup
PREFERENCES
1 Remote Control: VCR1
2 Auto Play: ON
3 Auto TV/VCR: ON
4 Front Panel: AUTO
5 CA Marking: ON
6 CA Playback: AUTO
7 CA Display: BLUE
8 Set Auto Repeat
0 Exit