Roland RT-10T - Manual (Page 14)

14
Percussion Sound Module Parameter Settings
Following you will find specific parameter settings for the indicated percussion sound modules.
These are VERY important. If needed, please refer to the Owner’s Manual of your module.
* The trigger parameters should be adjusted as necessary to match the actual state of your configuration, and
the environment in which it is being used.
RT-10S Snare Trigger Dual Trigger Compatible Inputs
TD-20: 2 (SNARE), 3–6 (TOM1–4), 12–15 (AUX1–4)
TD-12: 2 (SNARE), 3–5 (TOM1–3), 11–12 (AUX1–2)
RT-10S Snare Trigger Dual Trigger Compatible Inputs
2 (SNARE)
TD-20/TD-12
(Percussion Sound Module)
Parameter RT-10K
Kick Trigger RT-10S
Snare Trigger RT-10T
Tom Trigger
Trig Type RT7K RT5S RT3T
TRIGGER
BASIC Sensitivity 8 10 10
Threshold 16 11 16
Curve LINEAR LINEAR LINEAR
TRIGGER
XTALK
CANCEL Xtalk Cancel 30 30 30
Mount Type PAD PAD PAD
Xtalk Group 1 1 1
TRIGGER
ADVANCED Scan Time (ms) 3.5 2.0 2.0
Retrig Cancel 13 11 13
Mask Time (ms) 12 10 10
Rim Gain ----- 1.0 -----
RimShot Adjust ----- 3.0 -----
XStick Thrshld ----- 90 -----
TD-6V
(Percussion Sound Module)
Parameter RT-10K
Kick Trigger RT-10S
Snare Trigger RT-10T
Tom Trigger
TRIG
BASIC TrigTyp RT-7K RT-5S RT-3T
Sensitivity 10 10 10
Threshold 6 6 8
TrigCurve LINEAR LINEAR LINEAR
Xtalk Cancel 30 30 30
TRIG
ADVNCD Scan Time 2.0ms 2.0ms 2.0ms
Retrig Cancel 6 4 5
Mask Time 24ms 12ms 12ms
Rim Sens ----- 7 -----
RT-10KST_e.fm 14 ページ ２００６年３月３０日 木曜日 午後１時５５分