Roland RT-10T - Manual (Page 12)

12
Troubleshooting
• Is the volume too loud of nearby monitor speakers?
• If in a band situation, is the bass amp too close or too loud?
• Adjust the “Threshold” value. (p. 9)
Separate triggering from the rim is only possible when using the RT-10S snare trigger.
• Make sure the cable is Stereo.
• Verify that the trigger input you are using is rim-shot capable. (p. 14)
• Verify your trigger parameter settings in the module you are using. (p. 14)
• This is normal if you are not using the RT-10S snare trigger.
• Adjust the “Sensitivity” value. (p. 9)
Sounds Are Triggered Without Playing the Drums
No Sound When Playing Softly
No Sound From the Rim
when Playing a Rim Shot or Just the Rim
Same Sound from the Rim and Head
Dynamic Response Seems Strange
RT-10KST_e.fm 12 ページ ２００６年３月３０日 木曜日 午後１時５５分