beautypg.com

Using the unit safely, Warning – Roland GA-212 User Manual

Page 4

background image

2

USING THE UNIT SAFELY

Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (inside front cover), “USING THE UNIT SAFELY“ (p. 2),

and “IMPORTANT NOTES“ (p. 3). These sections provide important information concerning the proper operation of the unit. Additionally, in order to

feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual should be read in its entirety. The manual

should be saved and kept on hand as a convenient reference.

WARNING

Turn off the unit if an abnormality or malfunction
occurs

Immediately turn the unit off, remove the

power cord from the outlet, and request

servicing by your retailer, the nearest

Roland Service Center, or an authorized

Roland distributor, as listed on the

“Information” page when:
• The power-supply cord or the plug has

been damaged; or

• If smoke or unusual odor occurs; or
• Objects have fallen into, or liquid has

been spilled onto the unit; or

• The unit has been exposed to rain (or

otherwise has become wet); or

• The unit does not appear to operate

normally or exhibits a marked change in

performance.

Adults must provide supervision in places where
children are present

When using the unit in locations where

children are present, be careful so no

mishandling of the unit can take place. An

adult should always be on hand to provide

supervision and guidance.

Do not drop or subject to strong impact

Protect the unit from strong impact.

(Do not drop it!)

Do not share an outlet with an unreasonable number
of other devices

Do not force the unit’s power-supply cord

to share an outlet with an unreasonable

number of other devices. Be especially

careful when using extension cords—the

total power used by all devices you have

connected to the extension cord’s outlet

must never exceed the power rating

(watts/amperes) for the extension cord.

Excessive loads can cause the insulation

on the cord to heat up and eventually melt

through.

Do not use overseas

Before using the unit in a foreign country,

consult with your retailer, the nearest

Roland Service Center, or an authorized

Roland distributor, as listed on the

“Information” page.

Do not connect the unit to an electrical outlet when
there is condensation on or in it

When moved from one location to

another where the temperature and/or

humidity is very different, water droplets

(condensation) may form inside the unit.

When such conditions exist, you risk

causing malfunction if you connect the

unit to an electrical outlet. First, make sure

any condensation has been eliminated by

allowing the unit to acclimate for several

hours; then, you can connect it to an

electrical outlet.

WARNING

Make sure that the power cord is grounded

Connect mains plug of this model to a

mains socket outlet with a protective

earthing connection.

Do not disassemble or modify by yourself

Do not open or perform any internal

modifications on the unit.

Do not repair or replace parts by yourself

Do not attempt to repair the unit, or

replace parts within it (except when this

manual provides specific instructions

directing you to do so). Refer all servicing

to your retailer, the nearest Roland Service

Center, or an authorized Roland distributor,

as listed on the “Information” page.

Do not use or store in the following types of locations

• Subject to temperature extremes (e.g.,

direct sunlight in an enclosed vehicle,

near a heating duct, on top of heat-

generating equipment); or are

• Damp (e.g., baths, washrooms, on wet

floors); or are

• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and

shakiness.

Do not place in an unstable location

Make sure you always have the unit

placed so it is level and sure to remain

stable. Never place it on stands that could

wobble, or on inclined surfaces.

Connect the power cord to an outlet of the correct
voltage

The unit should be connected to a power

supply only of the type described as

marked on the rear side of unit.

WARNING

Use only the included power cord

Use only the attached power-supply cord.

Also, the included power cord must not be

used with any other device.

Do not bend the power cord or place heavy objects
on it

Do not excessively twist or bend the

power cord, nor place heavy objects on it.

Doing so can damage the cord, producing

severed elements and short circuits.

Damaged cords are fire and shock hazards!

Avoid extended use at high volume

This unit, either alone or in combination

with an amplifier or speakers, may be

capable of producing sound levels that

could cause permanent hearing loss. Do

not operate for a long period of time at

a high volume level, or at a level that is

uncomfortable. If you experience any

hearing loss or ringing in the ears, you

should immediately stop using the unit,

and consult an audiologist.

Don’t allow foreign objects or liquids to enter unit;
never place containers with liquid on unit

Do not place containers containing liquid

on this product. Never allow foreign

objects (e.g., flammable objects, coins,

wires) or liquids (e.g., water or juice) to

enter this product. Doing so may cause

short circuits, faulty operation, or other

malfunctions.

Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or

other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.

Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.

The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.

The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.

About WARNING and CAUTION Notices

About the Symbols

ALWAYS OBSERVE THE FOLLOWING