Mounting the htx-242 in a vehicle – Radio Shack HTX-242 User Manual
Page 7
7
Mounting the HTX-242 in a Vehicle
When you select a mounting location for the HTX-242, be sure:
•
You can easily reach it
•
No wires or cables will interfere with the vehicle’s operation
•
It is not directly in front of heating vents
•
All wires will reach their connection points
Use the supplied screws, metal washers, bracket, rubber washers,
and mounting knobs, as shown, to mount the transceiver.
Cautions:
•
To avoid damaging your vehicle’s electronic systems, contact your
vehicle’s manufacturer before you install the HTX-242 to find out
about the proper transceiver mounting locations, antenna loca-
tions, and power and antenna cable routing guidelines.
•
Do not apply power to the transceiver until after you properly
mount and connect an antenna.