Radio Shack HTX-242 - Manual (Page 39)

39
Menu
Item
Default
Option
Explanation/Available Settings Page #
SC ti Scan resume option.
ti —time out in 10 seconds.
Cr —resume after carrier drops.
SE —do not resume scanning.
20
Sd 2.0 Scan delay (delay before resume when
SC is set to Cr ). 0.5 , 1 , 2 , or 4 .
21
S1 – – – . – – – Scan skip frequency 1 (frequency for
HTX-242 to skip when scanning VFO). 20
S2 – – – . – – – Scan skip frequency 2. 20
S3 – – – . – – – Scan skip frequency 3. 20
S4 – – – . – – – Scan skip frequency 4. 20
S5 – – – . – – – Scan skip frequency 5. 20
Lb 4 Look-back time (how often the HTX-
242 checks Priority Memory Channel 1
for a transmission when the alarm is
activated).
4 , 8 , 12 , or 16 .
30
SL 144.000 Lower scan limit. With SH , determines
the VFO scanning range.
21
SH 148.000 Upper scan limit. 21
Ar oFF Auto reply (controls whether the HTX-
242 transmits a DTMF memory
sequence when it is DTMF paged).
oFF
or on .
34
to oFF Time-out option (sets whether the
HTX-242 limits transmissions).
oFF ,
1 , 2 , 3 , 5 , 7 , 10 , or 15 .
24
bp oN Keytone beep option. 24
AS on Auto duplex/simplex option (controls
whether the HTX-242 uses the stan-
dard repeater offsets).
oFF or on .
25
dA oFF DTMF auto send (controls whether the
HTX-242 transmits the contents of the
currently-selected DTMF memory each
time you press PTT).
oFF or on .
35