Radio Shack HTX-242 - Manual (Page 30)

30
Tuning to a Standard Memory Channel
1. Press MR .
2. Rotate M-CH , or press UP or DOWN on the microphone, to
select the desired memory channel.
Using the Calling-Frequency Memory
Press CALL . The HTX-242 recalls all settings saved in the calling-
frequency memory.
Checking Priority Channel 1
To have the HTX-242 periodically “look back” at Memory Channel
1 to check for a transmission, press
F then ALM . appears on the
display. The HTX-242 looks back at Memory Channel 1 every 4, 8,
12, or 16 seconds. If there is a transmission, the HTX-242 beeps to
let you know to tune to it, if desired.
Follow these steps to change the look-back time.
1. Press VFO .
2. Hold F for at least 1 second. FUNC flashes. Then press MR .
3. Repeatedly press
▲
until the HTX-242 displays Lb and the
current look-back time.
4. Rotate TUNE , or press UP or DOWN on the microphone, to
select the desired look-back time (4, 8, 12, or 16 seconds).
5. Press MR or PTT to save the setting.
Notes:
• If you rotate TUNE , press UP or DOWN , or directly enter a fre-
quency, the HTX-242 returns to the last-used VFO.
• To return to the mode selected before you used the calling-
frequency memory, press CALL again.
!