Radio Shack HTX-242 - Manual (Page 14)

14
Understanding the Display
One or more of the following indicators appear when you turn on
and use your HTX-242.
VFO-A or VFO-B — appears when you select one of the VFO
modes. See “Dual VFO Modes” on Page 12.
VFO-A-T
VFO-B
— appears when you select the DUP-A mode (transmit
on VFO-A and receive on VFO-B). See “Using the Dual VFOs for
Duplex Operation” on Page 27.
VFO-A
VFO-B-T
— appears when you select the DUP-B mode (receive on
VFO-A and transmit on VFO-B). See “Using the Dual VFOs for
Duplex Operation” on Page 27.
BUSY — appears when the HTX-242 is receiving a transmission.
See “Receiving Transmissions” on Page 22.
FUNC — appears after you press F . Flashes after you hold F for at
least 1 second.
LOCK — appears when you lock the HTX-242’s functions. See
“Locking the Controls” on Page 17.
T — appears when transmit subaudible tone is turned on. See
“Using Subaudible Tones” on Page 36.
T-SQL — appears when both transmit subaudible tone and sub-
audible tone squelch are turned on. See “Using Subaudible Tones”
on Page 36.
ALT — appears when you turn on the DTMF page/subaudible tone
alert. See “Setting the DTMF Page and Subaudible Tone Alert” on
Page 37.