beautypg.com

Appendix, Inside air contamination – Raypak Hi Delta 992B-1262B User Manual

Page 60

background image

60

APPENDIX

Inside Air Contamination

All heaters experience some condensation during
start-up. The condensate from flue gas is acidic.
Combustion air can be contaminated by certain vapors
in the air which raise the acidity of the condensate.
Higher acidity levels attack many materials including
stainless steel, which is commonly used in high effi-
ciency systems. The heater can be supplied with
corrosion-resistant, non-metallic intake air vent materi-
al. You may, however, choose to use outside
combustion air for one or more of these reasons:

1.

Installation is in an area containing contaminants
listed below which will induce acidic condensation.

2.

You want to reduce infiltration into your building
through openings around windows and doors.

3.

You are using AL29-4C stainless steel vent pipe,
which is more corrosion-resistant than standard
metallic vent pipe. In extremely contaminated ar-
eas, this may also experience deterioration.

Products causing contaminated combustion air:

spray cans containing chloro/fluorocarbons

permanent wave solutions

chlorinated waxes/cleaners

chlorine-based swimming pool chemicals

calcium chloride used for thawing

sodium chloride used for water softening

refrigerant leaks

paint or varnish removers

hydrochloric acid/muriatic acid

cements and glues

antistatic fabric softeners used in clothes dryers

chloride-type bleaches, detergents, and cleaning
solvents found in household laundry rooms

adhesives used to fasten building products

similar products

Areas where contaminated combustion air commonly
exists:

dry cleaning/laundry areas

metal fabrication plants

beauty shops

refrigeration repair shops

photo processing plants

auto body shops

plastic manufacturing plants

furniture refinishing areas and establishments

new building construction

remodeling areas

open pit skimmers

Check for areas and products listed above before in-
stalling heater. If found:

remove products permanently, OR

install TruSeal direct vent