Radio Shack PRO-92 - Manual (Page 56)

56 Trunking Operation
Locking Out Talk Group IDs
Note: You can only lock out talk group IDs when the
scanner is in the closed mode (see “Open and Closed
Modes” on Page 57).
1. Press PGM .
2. Press TRUNK .
3. Press FUNC , or to move the desired bank.
4. Press or to select the ID memory.
5. Press L/OUT to lock out the ID. L appears.
6. To remove the lockout from a trunking ID, manually
select the ID memory, and press L/OUT until L dis-
appears.
Reviewing Locked-Out Talk Group IDs
Note: You cannot clear all lockouts from a talk group at
the same time.
1. Press PGM then TRUNK .
2. Press FUNC then L/OUT . The locked out ID appears.
If the ID memory bank has no locked out ID, you
hear the low beep tone.
3. Press FUNC then or to select a search bank.
Or, just press or to search for any locked
out IDs in a bank.
Clearing Talk Group IDs
1. Press PGM then TRUNK .
2. Press FUNC , or to select ID memory.
3. Press FUNC then CL .
Clearing All Talk Group IDs in One Bank
You can clear all talk group IDs within a bank. This lets
you quickly delete all talk group IDs from a bank (for ex-
ample, if you want to use the bank to store a different set
of talk group IDs).
20-522b.fm Page 56 Thursday, September 7, 2000 9:41 AM