Radio Shack PRO-92 - Manual (Page 36)

36 Operation
• If bank 9 in the channel storage banks does not
contain any empty channels, Bank 9 full.
appears on the display’s lower line.
Storing a Frequency While Searching for a
Specified Channel
1. When the scanner stops on the frequency, press
FUNC then TUNE .
2. Press MANUAL . Select the specified channel using
a number key, then press MANUAL again.
3. Press PGM .
4. Press FUNC then TUNE to store the frequency.
5. If desired, press SEARCH to resume searching.
Changing a Search Range with a
Preprogrammed Range
You can replace the search range with one of the pre-
programmed ranges.
1. Press FUNC then SEARCH to enter search program
mode. PSR and the search bank number of the cur-
rent range appear at the display’s upper left corner.
2. Press or to select the search bank you want to
replace.
3. Press FUNC then 5 . ?SR and the search bank num-
ber appear at the display’s upper left corner.
20-522b.fm Page 36 Thursday, September 7, 2000 9:41 AM