Radio Shack PRO-92 - Manual (Page 54)

54 Trunking Operation
6. Press ENTER for each entry. If you make a mistake,
press CL and enter the correct size code.
Note: The default setting of the bank is for Motorola
Type II. However, if you set Type I and you want to
return to Type II, enter
15 at Step 5.
7. To confirm the input, repeat Steps 1–5 and press
ENTER . Each time you press ENTER , you confirm
the size code. If you find an error, press CL and
begin again at Step 1.
8. Press SCAN to start scanning.
TALK GROUP IDS
You can program up to 100 talk group IDs in each bank.
When the scanner stops on a transmission in the LTR,
Motorola, or EDACS mode, it checks to see if the ID has
been stored. In the closed mode, the scanner only stops
on the transmission and displays its text tag if you have
stored and not locked out the ID. In the open mode, the
scanner always stops on a transmission, but it displays
the ID’s text tag if you have stored the ID.
B
L
O
C
K
Size Code
9 10 11 12 13 14 15 16
0 S4 S0 S4 S0 S3 S4 S4 S3
1 S4 S0 S0 S0 S3 S3 S4 S10
2 S0 S0 S0 S0 S11 S10 S4 S10
3 S0 S0 S0 S0 S4 S4 S11 S11
4 S0 S0 S0 S0 S4 S4 S11 S0
5 S0 S0 S0 S0 S0 S4 S0 S0
6 S0 S4 S0 S0 S0 S12 S12 S12
7 S0 S4 S0 S4 S0 — — —
20-522b.fm Page 54 Thursday, September 7, 2000 9:41 AM