Radio Shack PRO-92 - Manual (Page 53)

53 Trunking Operation
PROGRAMMING FLEET MAPS
You must set the fleet map if you want to receive a Mo-
torola Type I system. Fleet maps are included along with
other information about Motorola Type I systems at
www.trunkscanner.com.
Follow these steps to program a fleet map.
1. Press PGM then TRUNK .
2. For each bank you want to program, repeatedly
press FUNC , , or to select the bank.
3. Press FUNC .
4. Press 8 . The following display appears:
5. Enter the size code supplied with the Type I system
information, referring to the instruction that appears
on the display. If the information was not supplied,
try the following common fleet maps.
B
L
O
C
K
Size Code
1 2 3 4 5 6 7 8
0 S11 S4 S4 S12 S4 S3 S10 S1
1 S11 S4 S4 — S4 S10 S10 S1
2 S11 S4 S4 S4 S12 S4 S11 S2
3 S11 S4 S4 S4 — S4 S4 S2
4 S11 S4 S4 S4 S4 S12 S4 S3
5 S11 S4 S4 S4 S4 — S4 S3
6 S11 S4 S12 S4 S4 S12 S4 S4
7 S11 S4 — S4 S4 — S4 S4
20-522b.fm Page 53 Thursday, September 7, 2000 9:41 AM