Radio Shack PRO-92 - Manual (Page 43)

43 Special Features
3. Turn SQUELCH fully counterclockwise until the indi-
cator points to MIN .
4. Press FUNC then 4 . Confirm list clear?
1=YES Press other key for NO.
appears. Press 1 to clear all lock-out frequencies
and List cleared appears for about 2 seconds.
Press any key other than 1 , to cancel clear.
Note: You cannot clear all lock-out frequencies if all
frequencies in the selected bank are locked out.
5. Turn SQUELCH clockwise and leave it set to a point
just until the hissing sound stops.
PRIORITY
With the priority feature, you can scan through pro-
grammed channels and still not miss an important or in-
teresting call on a specific channel. When a channel is
selected as the priority channel and priority is turned on,
the scanner checks that channel every 2 seconds, and
stays on the channel if there is activity until the activity
stops.
The scanner is preset to select Channel 00 in Bank 8 as
the priority channel. You can program a different chan-
nel as the priority channel. Also, you can program a
weather channel as the priority channel.
Notes:
• The priority feature does not operate while the scan-
ner receives trunking frequencies.
• If you program a weather channel as the priority
channel, the scanner stays in the priority channel
only when the scanner detects the weather alert
tone.
Follow these steps to program a channel as the priority
channel.
1. Press MANUAL .
2. Use the number keys to enter the channel number
you want to program as the priority channel. Then
press
MANUAL again.
20-522b.fm Page 43 Thursday, September 7, 2000 9:41 AM