Radio Shack PRO-92 - Manual (Page 15)

15 Preparation
3. Plug the adapter’s cigarette-lighter plug into your
vehicle’s cigarette-lighter socket.
Note: If the scanner does not operate properly when you
connect a DC adapter, unplug the DC adapter from the
cigarette-lighter socket and clean the socket to remove
ashes and other debris.
CONNECTING THE ANTENNA
Follow these steps to attach the supplied flexible anten-
na to the
ANT jack on the top of your scanner.
1. Align the slots around the antenna’s connector with
the tabs on the ANT jack.
2. Press the antenna down over the jack and turn the
antenna’s base clockwise until it locks into place.
Connecting an Optional Antenna
The antenna connector on your scanner makes it easy
to use the scanner with a variety of antennas, such as an
external mobile antenna or outdoor base station anten-
na. Your local RadioShack store sells a variety of anten-
nas.
20-522b.fm Page 15 Thursday, September 7, 2000 9:41 AM