Radio Shack PRO-92 - Manual (Page 40)

40 Special Features
weather channel with a digitally-encoded SAME signal
when an alert is broadcast, the scanner will decode and
display the SAME message, showing the type of alert
being broadcast (or
Unknown Message if it does not
recognize the event code).
To set the scanner to decode and display SAME mes-
sages, press
FUNC then WX while you listen to the
weather channel. DIG WX STBY and Cancel : F+WX
appear.
To set the scanner out of the SAME standby mode,
press
FUNC then WX again. DIG WX STBY disappears.
Notes:
• The scanner does not display the actual location
referenced by SAME messages. It uses only the
message portion of the SAME signal.
• Your scanner can also receive weather alert tones
(see “Priority” on Page 43).
ˆ
Special Features
USING THE DELAY FUNCTION
Note: Delay is automatically set as the default for each
channel when you turn on the scanner.
Many conversations might have a pause of several sec-
onds between a query and a reply. To avoid missing a
reply, you can program a 2-second delay into any of
your scanner’s channels. Then, when the scanner stops
on the channel,
D appears and the scanner continues to
monitor the channel for 2 seconds after the transmission
stops before it resumes scanning or searching.
To turn delay on or off, press FUNC then DELAY .
20-522b.fm Page 40 Thursday, September 7, 2000 9:41 AM