Table 4-1 . aspect ratio settings, Pre l iminar y – Runco PLASMAWALL SP-60DHD / SP-60DHDXA User Manual
Page 47
PlasmaWall SP Series Owner’s Operating Manual
37
PRE
L
IMINAR
Y
Table 4-1. Aspect Ratio Settings
Aspect Ratio
Remote
Control
Key
Description
16:9
(Anamorphic)
ANA
Select 16:9 (Anamorphic) to
view 16:9 DVDs and HDTV
programs in their native aspect
ratio.
4:3 images are stretched hori-
zontally to fit a 16:9 screen.
Standard 4:3
4X3
Standard 4:3 scales the input
signal to fit in the center of the
16:9 screen. 4:3 is the aspect
ratio used by computer
monitors, standard television
programming and most VHS
video cassettes.
Letterbox
LET
BOX
Letterbox mode scales (zooms
in on) a 4:3 image linearly (by the
same amount on all sides) to fill
a 16:9 display.
Letterbox is best suited for
viewing LaserDisc movies or
non-anamorphic DVDs on a
16:9 screen.
VirtualWide
V-WIDE
VirtualWide scales a 4:3 image
NON-linearly (more on the sides
than in the center) to fit a 16:9
screen.
Cinema
CINEMA
Select Cinema to view 2.35:1
source material on a 16:9
screen. The upper and lower
portions of the screen are
masked, but the geometry of the
active image area is not
changed.
4:3 Image, stretched to fill
16:9 Screen (Display)
16:9 Image on
16:9 Screen (Display)
4:3 Image on
16:9 Screen (Display)
4:3 Image on
16:9 Display
(Letterbox aspect ratio)
4:3 Image on
16:9 Screen
with VirtualWide
2.35:1 Image on
16:9 Screen