Pre l iminar y – Runco PLASMAWALL SP-60DHD / SP-60DHDXA User Manual
Page 28
18
PlasmaWall SP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
• Do not drop the remote control or expose it to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. If that occurs, move the
plasma display away from the fluorescent lamp.
• Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the plasma display.
• If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
• Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the plasma display and repeat the operation.
The signal from the remote control can be reflected by walls or
other surfaces.
Note