2 dhd controller front panel, Figure 2-5 . dhd controller front panel, Dhd controller front panel – Runco PLASMAWALL SP-60DHD / SP-60DHDXA User Manual
Page 20: 5. dhd controller front panel, Pre l iminar y
10
PlasmaWall SP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
2.2
DHD Controller Front
Panel
Figure 2-5 shows the controls and indicators on the DHD Controller front panel; the
paragraphs that follow describe them.
Figure 2-5. DHD Controller Front Panel
1.
RUNCO ICON
Lights red to indicate that the DHD Controller is in standby mode; lights blue to
indicate that the unit is on.
2.
POWER BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to
standby mode. For a discrete on or off command, you can use the direct access
buttons on the remote control.
3.
IR SENSOR
Receives IR commands from the remote.
4.
VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the current source, signal format (NTSC or PAL),
input resolution and aspect ratio.
2
3
1
4
5
6
7
8
9
10