3 dhd controller rear panel, Figure 2-6 . dhd controller rear panel, Outputs – Runco PLASMAWALL SP-60DHD / SP-60DHDXA User Manual
Page 22: Inputs, Dhd controller rear panel, 6. dhd controller rear panel, Pre l iminar y
12
PlasmaWall SP Series Owner’s Operating Manual
PRE
L
IMINAR
Y
2.3
DHD Controller Rear
Panel
Figure 2-6 shows the rear connector panel on the DHD Controller.
Figure 2-6. DHD Controller Rear Panel
Outputs
1.
ANALOG OUTPUTS (RGBHV)
Connect these to the ANALOG RGB IN input of the PlasmaWall, using a
5 x BNC-to-VGA breakout cable.
2.
DVI OUT
Connect this to the DIGITAL RGB (DVI-D) input on the PlasmaWall.
Inputs
3.
DVI 1 / DVI 2 (Digital)
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner
with a DVI or HDMI output.
4.
HD1 / HD2 (5 x Analog BNCs)
Two inputs (five BNCs per input) for connecting either RGB or component
high-definition television signals. The DHD Controller automatically detects the signal
format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.
5.
COMPONENT VIDEO (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.
Pb
Pr
Y
Video
3
IR
RS-232 Control
S-Video 1
S-Video 2
HD1
HD2
1
2
R/Pr
G/Y
B/Pb
R/Pr
G/Y
B/Pb
H
V
DVI 1
DVI 2
DVI Out
H/V
V
H
R/Pr
G/Y
B/Pb
H
V
TRIGGERS
RS-232 Out
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
OUTPUTS
INPUTS
SYSTEM CONTROL INTERFACE
Component Video
SDI
Option
Serial No
Video Processor / Controller
Model
Runco International
Union City, CA
Made In USA
2
3
5
6
11
12
13
14
1
9
7
8
10
4
➤
➤
For best results, do not run your DVD player in progressive mode.
Tip