RCA RCU600M - Manual (Page 12)

This remote cannot access every menu system of all models and brands of
consumer electronics components. However, if you’ve successfully
programmed the DVD•AUX key to operate a DVD player, you can access
DVD disc menus with the MENU key.
The MENU key will access TV menu systems for most RCA, GE and
PROSCAN TVs, as well as some other popular brands. In addition, some
RCA VCR menus are supported by this remote’s MENU key. This remote
also supports select SATELLITE receiver menus.
If this remote’s MENU key doesn’t access the menu system for your
component, you’ll need to use the original remote to change menu settings.
Note: This remote’s MENU key doesn’t support CABLE box menu systems
and some VCR menu systems.
12
On-screen Menus
Accessing a Menu System
To access a menu system, follow these steps:
1. Make sure your components are
turned on and your TV is set to
the component’s input.
2. Press the component key on the remote
(TV, DVD, DBS•SAT) for the desired
menu screen.
3. Press the MENU key.
4. The menu for the component you
have chosen should be visible on
your television.
Highlighting and Selecting
Menu Items
To navigate on-screen menus, use the
ARROW
keys.
Note: For RCA, GE or ProScan TVs, press
the MENU key to select the highlighted
item. If menu items have numbers next
to them, you can use the number keys to
select an item. Additionally, the SELECT
key can be used to select menu choices.
• For users of RCA, GE and PROSCAN
DBS products, older DBS models
require that the INFO or MENU key on
this remote be used to make program
selections. Use the SELECT key for
making program selections on newer
RCA, GE and PROSCAN DBS models.
• For Sony products, pressing the ENTER
key while in Menu Mode returns you
to the previous menu.
• In some menu systems, you must
press the ENTER key to select the
highlighted item.
• All functions in competitive models
and brands of products may not be
fully supported.
• Because of the wide variety of menu
formats, some experimenting may
be required.
Exiting a Menu System
To exit the Menu Mode, press the CLEAR
key. The remote reverts back to its
normal operation.
This is an example of a DVD
disc on-screen menu. English
is the menu choice highlighted.
Using this remote control, you
would press the SELECT key
to choose English.
To highlight another language,
press the DOWN ARROW key.
(In the example above, the
highlight would move to Español.)
CLEAR
MENU•PROG
MENU•PROG
SELECT
ENTER
RCU600M_IB_resized.qxd 3/24/04 4:10 AM Page 12