Raymarine 320 - Manual (Page 94)

Chapter 4: Setting Up the Chartplotter 4-9
Customize Chart
This provides a list of chart options, enabling you to specify how the chart
features are displayed. Most options can be toggled between on, off and
custom. Custom passes on/off control to the SCREEN soft keys (see
Customizing the Screen Presentation Options in Chapter 2).
The following features can be set using Customize Chart, factory default
settings are shown in bold type:
• Chart Text (OFF, ON, CUSTOM)
• Chart Boundaries (OFF, ON, CUSTOM)
• Spot Soundings (OFF, ON, CUSTOM)
• Depth Shading Limit (10m to 999m)
• Depth Contours (OFF, ON, CUSTOM)
• Depth Contour Display (upper and lower limits) 0m to 100m
• Nav Marks (OFF, ON, CUSTOM)
• Light Sectors (OFF, ON, CUSTOM)
• Caution and Routing Data (OFF, ON, CUSTOM)
• Marine Features (OFF, ON, CUSTOM)
• Land Features (OFF, ON, CUSTOM)
Note: Factory default for CUSTOM options is ON.
WAYPOINT NUMBERS OFF
ON ON
DEFAULT WAYPOINT
SYMBOL Fish, skull,
X or anchor symbol X
HEADING VECTOR OFF, 3 MINS,
10 MINS
INFINITE OFF
COG VECTOR OFF, 3 MINS,
10 MINS
INFINITE OFF
TIDE VECTOR OFF, 10 MINS, 1
HOUR
INFINITE OFF
DATUM SELECTION WGS 84, LOCAL WGS 84
Parameter Options
Factory
Default New
Default
81167_3.BOOK Page 9 Wednesday, November 21, 2001 2:12 PM