beautypg.com

Figure 5-5: panel mounting, 5 connecting to other equipment, 5 connecting to other equipment -10 – Raymarine 320 User Manual

Page 109

background image

5-10

Raychart 320 Chartplotter

12. Screw the studs into the vacant holes at the rear of the unit, hand tight

only.

13. Slide a spacer ferrule onto each stud.
14. Secure the unit with the thumb nuts, hand tight only.

Figure 5-5: Panel Mounting

5.5 Connecting to Other Equipment

The unit transmits navigation and waypoint data on NMEA

1

and SeaTalk

and, therefore, can be connected to an NMEA compatible autopilot or
instrument repeater(s). The navigation data transmitted and received by
the Chartplotter is detailed in Appendix B to this handbook.

1. National Marine Electronics Association (NMEA) 0183 interconnection stan-

dard, Version 2.3 April 1998.

D4969-2

81167_3.BOOK Page 10 Wednesday, November 21, 2001 2:12 PM

See also other documents in the category Raymarine GPS receiver: