Layer: using two tones simultaneously – Roland KR-11 User Manual

Page 23

KR-11 – Keyboard modes

ENGLISH

Layer: using two Tones simultaneously

The word Layer is used to describe a situation where
every note you play triggers two Tones. The most pop-
ular Tone combination for layers is piano and strings,
but you are free to use any Tone combination you like.

Note: Layers are only available for the Upper part.

Here’s an example of how to layer two Tones (let’s use
piano and strings here).

1. Press the TONE [PIANO] button and select the
desired piano Tone.

2. Press on the Basic screen.

3. Press the TONE [STRINGS] button.
The indicator of the TONE button you press lights up.
Play a few notes on the keyboard to confirm that the
KR-11 is producing both a piano and a strings sound.
Let’s call the two Tones “Upper Tone” and “Layer
Tone”.

You can now select another Tone from the Strings
group. If, after choosing a Layer Tone, you decide to
use another Upper Tone, press again (to leave
Layer mode) and select the desired Tone (see above).

Note: Another way to select the Layer mode is to press two
TONE buttons simultaneously.

Upper Tone

Layer Tone

KR-11_Book Page 23 Thursday, November 21, 2002 9:35 PM