Nikon Coolpix S9300 - Manual (Page 118)

100
Gener
a
l Ca
mera Se
tu
p
General Camera Setup
The Setup Menu
From the menu screen, select the z tab to display the
setup menu, and then you can change the following
settings.
Press the d button M z (setup) tab (A11)
Option Description A
Welcome screen
Select the image displayed as the welcome screen
when the camera is turned on. Select COOLPIX to
display the COOLPIX logo. Select Select an image to
use a picture taken with the camera as the welcome
screen. The default setting is None.
E66
Time zone and date
Set settings related to the camera’s date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the x travel
destination is set, the camera automatically calculates
the time difference between the travel destination and
the w home time zone, and saves images using the
date and time of the travel destination.
E67
Monitor settings
In Photo info, select the kind of information that is
displayed on the monitor during shooting mode and
playback mode. If you select Framing grid+auto info,
a framing grid is displayed when shooting to help you
frame the picture. Also set the image display after
shooting, the screen brightness and whether or not to
display histograms on the monitor.
E70
Print date
Imprint the shooting date and time on pictures at the
time of shooting. The default setting is Off.
• Dates cannot be imprinted in the following situations.
- When the scene mode is set to Night landscape
(with Hand-held selected), Night portrait (with
Hand-held selected), Easy panorama or 3D
photography
- When the Continuous option ( A55) in
continuous shooting mode is set to Pre-shooting
cache, Continuous H: 120 fps, or Continuous
H: 60 fps
- During movie recording
E72
Vibration reduction
Motion detection
AF assist
Print date
Monitor settings
Time zone and date
Welcome screen
Set up