Nikon D300 - Manual (Page 415)

389
n
Can not print photos.
• Set [USB] to [MTP/PTP]. 318
• NEF (RAW) and TIFF photos can not be
printed by direct USB connection. Use
DPOF print service (TIFF images only)
or transfer to computer and print
using ViewNX version 1.2.0 or later or
Capture NX version 1.3.5 or later or
Capture NX 2 version 2.1.0 or later.
230
Photo is not
displayed on TV.
Choose correct video mode. 313
Photo is not displayed
on high-definition
video device.
Confirm that HDMI cable (available
separately) is connected.
244
Can not copy photos
to computer.
Choose correct [USB] option. 225
Photos not displayed
in Capture NX.
Update software to latest version. 368
Image Dust Off
option in Capture NX
version 1.3 does not
have desired effect.
Image sensor cleaning changes the
position of dust on the low-pass filter.
Dust off reference data recorded before
image sensor cleaning is performed can
not be used with photographs taken
after image sensor cleaning is performed.
Dust off reference data recorded after
image sensor cleaning is performed can
not be used with photographs taken
before image sensor cleaning is
performed.
319
Can not use Camera
Control Pro 2.
Set [USB] to [MTP/PTP]. 225
Computer displays
NEF (RAW) images
differently from
camera.
Third-party software does not display
effects of Picture Controls or active
D-Lighting. Use ViewNX version 1.2.0 or
later or optional Nikon software such as
Capture NX version 1.3.5 or later or
Capture NX 2 version 2.1.0 or later.
—
Problem Solution Page