Nikon D300 - Manual (Page 210)

184
t
Multiple Exposure
Follow the steps below to record a series of two to ten exposures
in a single photograph. Multiple exposures can be recorded at any
image quality setting, and produce results with colors noticeably
better than photographs combined in an imaging application
because they make use of RAW data from the camera image
sensor.
❚❚Creating a Multiple Exposure
Note that at default settings, shooting will end and a multiple
exposure will be recorded automatically if no operations are
performed for 30 s.
1
Select [Multiple exposure].
Highlight [Multiple exposure]
in the shooting menu and
press
2.
2
Select [Number of shots].
Highlight [Number of shots]
and press
2.
A
Extended Recording Times
For an interval between exposures of more than 30 s, select [On] for the
[Image review] (pg. 251) option in the playback menu and extend the
monitor-off delay using Custom Setting c4 ([Monitor off delay], pg. 280).
The maximum interval between exposures is 30 s longer than the option
selected for Custom Setting c4.