Network settings, Network feature setting, Store a feature code – Nokia 2255 User Manual
Page 34: Call divert

Copyright © 2005 Nokia. All rights reserved.
S e t t i n g s
26
Voice privacy
—Let you protect the
privacy of your current phone
conversation from other callers placing
phone calls on your network. Select
On
or
Off
.
■ Network settings
You can set your device to roam or
search for another network when you
are not in your home area. Your device
is set to search for the most cost-
effective network. These options are
network operator dependent and may
differ from those described.
In standby mode, select
Menu
>
Settings
>
Network settings
>
Network
. Select
Home only
to make
and receive calls in your home area
only, or
Automatic
to search for service
in another digital network. The
roaming rate applies when not in the
home service area. Press
OK
, if
necessary, to confirm the activation.
Network feature setting
Store a feature code
Feature codes can be set for
Call divert
,
Call waiting
, and
Send my caller ID
with next call
network services.
1. In standby mode, select
Menu
>
Settings
>
Network settings
>
Network feature setting
and an
option.
2. Select an option within that
service. For example,
Call divert
>
Divert all voice calls
>
Activate
.
3. At the
Feature code:
prompt,
enter the appropriate feature code
(5 characters or less).
You can enter other feature codes,
or press the end key to return to
standby mode. When you enter a
network feature code, the feature is
visible in the
Call settings
menu.
Call divert
Call divert tells your network to
redirect incoming calls to another
number. Call divert is a network service
and may not work the same in all
networks, so contact your wireless
provider for availability.
1. In standby mode, select
Menu
>
Settings
>
Call settings
>
Call
divert
and one of the following
options:
Divert all voice calls
—Divert all calls
to the number you specify.
Divert if busy
—Divert incoming
calls when you are in a call.
Divert if not answered
—Divert
incoming calls to another number
if you are unable to answer.
You can set a delay before
diverting takes place.