beautypg.com

Profiles, Activate, Personalise a profile – Nokia 2255 User Manual

Page 29: Set a timed profile, Activate personalise a profile set a timed profile, Personalise a, Profile

background image

Copyright © 2005 Nokia. All rights reserved.

S e t t i n g s

21

calls, keypad lock, silent mode,

and received messages.

Backlight time

—Select whether the

backlights are switched on for 15

seconds (

Normal

), for 30 seconds

(

Extended

), or not at all (

Off

). Even if

the backlight is set to off, it stays on

for 15 seconds when the device is

switched on.

Brightness

—Scroll left and right to

modify the brightness of the display.

Profiles

You can personalise the device for

different events and environments.

After you have personalised a profile,

you can activate the profile whenever

you want to use it.

Activate

In standby mode, select

Menu

>

Settings

>

Profiles

, the desired

profile, then

Activate

. You can also

briefly press the end key to scroll

through and activate a profile.

Personalise a profile

In standby mode, select

Menu

>

Settings

>

Profiles

, the desired

profile, then

Personalise

. Select the

option you want and follow the

prompts.

You can change the settings of the

currently selected profile in this menu

and can change some or all of the

settings in

Tone settings

(see

Tone

settings

”, p.

20

) and

Display settings

(see “

Display settings

”, p.

20

).

Set a timed profile

Timed profiles can be used to prevent

missed calls. For example, you attend

an event that requires your device be

set to

Silent

before the event starts,

but you forget to return to the previous

active profile until long after the event.

During this time, you have missed

several calls because the ringing tone

was silent.

You can set a timed profile to expire

after any length of time up to 24 hours.

When the profile expires, your device

automatically returns to the default

profile.

1. In standby mode, select

Menu

>

Settings

>

Profiles

, the desired

profile, then

Timed

.

2. Enter the time for the profile to

expire, and select

OK

.

The profile you set for expiration is

now active and appears in standby

mode along with a small clock icon.