Nortel Networks 4065R - Manual (Page 56)

Audio settings
56
Selecting the ringer type
Use this procedure to switch on the ringer signalling function, and specify
a full melody or a chirp (a short series of tones). The current selection is
indicated by a check mark (o).
To select ringer type:
Selecting the ringer device
Use this function to activate the buzzer (audio alert), vibrator, or headset.
The active function is indicated by a check mark (o).
To select ringer device:
1. Open the
Ringer Settings
menu as discussed in
“Accessing the Ringer Settings menu” on page 54.
2. Press the
arrow
keys to scroll and highlight the
Type
option.
3. Press the
OK
soft key.
4. Press the
arrow
keys to scroll and highlight one of
the following:
—
Full Melody
—
Chirp
5. Press the
OK
soft key.
6. Press the
Esc
soft key one or more times to return to
the idle display.
1. Open the
Ringer Settings
menu as discussed in
“Accessing the Ringer Settings menu” on page 54.
2. Press the
arrow
keys to scroll and highlight the
Device
option.
3. Press the
OK
soft key.
N
Type
OK
N
Full Melody
or
Chirp
OK
Esc
N
Device
OK