NEC GT2000 - Manual (Page 63)

E-63
Deleting a Range of Data (Entry Delete)
This function specifies the range that is to be deleted and deletes the signal
data.
1. Displaying the Signal Registration Menu Display
Select [Memory]
→
[User Memory] or [Channel Memory] from the main
menu, then press the ENTER button.
The signal registration menu display will appear.
See "Selecting Memory Display" on Page E-57 for details.
2. Deleting
Press the remote control ▲/▼ button and select [Entry Delete], then press the
ENTER button.
The display will change to the user memory or the channel memory display.
"Delete: Starting No. Selection" will appear at the bottom of the display.
1) Press the remote control ▲/▼ button and select the starting number of the
deletion, then press the ENTER button.
"Delete: Ending No. Selection" will appear at the bottom of the display.
2) Press the remote control ▲/▼ button and select the ending number of the
deletion, then press the ENTER button.
When only one digit is to be deleted, just press the ENTER button.
A verification display to the effect of Delete? will appear. Press the remote
control ▲/▼ button and select Yes/No, then press the ENTER button.
This ends the deletion procedure.
To turn off the display, press the MENU button. The display will return to the
main menu. A further press of the MENU button will turn off the display.
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03
CUTOM 0004 S-VIDEO Off
04
05
06
CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2
On
08
09
CUTOM 0010 VIDEO Off
Delete: Select Start Line
User Memory
P01/10
No Name
Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03
CUTOM 0004 S-VIDEO Off
04
05
06
CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09
CUTOM 0010 VIDEO Off
Delete: Select End Line
User Memory
P01/10
No Name
Source Slot Lock
00
01
02
03
04
05
06
CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09
CUTOM 0010 VIDEO Off
Delete?
NO. 00-03
Yes
No