NEC GT2000 - Manual (Page 59)

E-59
Storing the Adjustment Data (Store)
This function is used to store the screen and picture adjustment data currently
being projected.
The signal name and other data can be edited later.
1. Project the Picture of the Input Equipment
Select [Memory]
→
[User Memory] or [Channel Memory] from the main
menu.
The user memory or channel memory will be displayed.
See "Selecting Memory Display" on Page E-57 for details.
2. Select the Number to Be Stored
Press the remote control ▲/▼ button and select the list number or the channel
number, then press the ENTER button.
The display will change to the signal registration menu.
(When input selection and projection are conducted from the user memory or
the channel memory, the selection cursor will move to that number.)
3. Storing the Adjustment Data
1) Press the remote control ▲/▼ button, select [Store], then press the ENTER
button.
The display will change to the store verification display.
2) Press the remote control ▲/▼ button, select Yes/No, then press the ENTER
button.
* When a registered number is selected, the overwrite verification display will
appear.
This ends the data storage procedure.
To turn off the display, press the MENU button. When the display has returned
to the main menu, press the MENU button again to turn off the display.
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03
CUTOM 0004 S-VIDEO Off
04
05
06
CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09
CUTOM 0010 VIDEO Off
User Memory
P01/10
No Name Source Slot Lock
00 CUTOM 0001 RGB1 Off
01
02
03
CUTOM 0004 S-VIDEO Off
04
05
06
CUTOM 0007 YCbCr1 On
07 CUTOM 0008 RGB2 On
08
09
CUTOM 0010 VIDEO Off
Signal Entry
Entry Copy
Entry Move
Entry Delete
Change Defalut
Memory edit
Load
Store
Store?
Yes
No
Overwrite?
Yes
No