National Instruments Deterministic Ethernet Expansion Chassis NI 9144 User Manual
National Instruments Hardware
Table of contents
Document Outline
- NI 9144 User Guide and Specifications
- Contents
- Introduction
- Safety Guidelines
- Mounting the NI 9144 Chassis
- Connecting the NI 9144 Chassis to a Network
- Understanding LED Indications
- Resetting the NI 9144 Network Configuration
- Safe-State Outputs
- Slave Timing Modes
- Updating your Firmware
- Using the NI 9144 with an EtherCAT Third-Party Master
- Specifications
- Appendix A
- Vendor Extensions to the Object Dictionary
- Supported C Series Modules
- C Series Modules with No Configurable Options
- NI 9201/9221
- NI 9203
- NI 9205/9206
- NI 9211
- NI 9213
- NI 9215
- NI 9217
- NI 9219
- Table 32. NI 9219 Vendor Configuration Extensions
- Table 33. NI 9219 ADC Format Field Format
- Table 34. NI 9219 Channel Calibration
- Table 35. NI 9219 Calibration Data
- Table 36. NI 9219 Command Word Format
- Table 37. NI 9219 Scan List Format
- Table 38. NI 9219 Conversion Time Value
- Table 39. NI 9219 Type Conversion Time
- Table 40. NI 9219 Mode and Range Type
- Table 41. NI 9219 Configuration 1: Command Bytes
- NI 9233
- NI 9234
- NI 9237
- NI 9229/9239
- NI 9263
- NI 9264
- NI 9265
- NI 9401
- NI 9403
- NI 9476
- Where to Go for Support