NETGEAR ReadyNAS 3200 - Manual (Page 28)

ReadyNAS 3200 Hardware Manual
2-10 Diagnostics and Maintenance
v1.1, July 2009
RAIDar shows that the system is initializing the volume.
The system powers down when the volume initialization completes.
9. Power the system on. It will perform diagnostics while it boots.
10. Click Rescan in RAIDar to connect to the system.
RAIDar will find the system and show that it is booting.
11. When RAIDar shows that the system is ready, select the system from the list, and click Setup
to log in to FrontView and configure the system.
Figure 2-4
Figure 2-5
Figure 2-6