Network Computing Devices 300 - Manual (Page 36)

Advanced Users Configuration Notes
A-4 NCD ThinSTAR 300 User’s Guide
Task Action
Designating
default
connections On the Configure tab, select the
connection you want as the default.
Display the Connection Startup panel by
clicking
Startup . Click the Make the
selected connection your default
connection option and click
OK.
Configuring
autostart
connections On the Configure tab, select the
connection you want to start
automatically. Display the Connection
Startup panel by clicking
Startup .
Click the Automatically start the selected
connection at startup option and click
OK.
Note An autostart connection also
functions as the default
connection. Designating a
different connection as the
default makes any autostart
connection revert to
non-autostart status.
When you log off an autostart
connection, the connection
restarts automatically, see
“Stopping autostart connections”
below.
Stopping
autostart
connections On the Configure tab, select the autostart
connection you want to end. Display the
Connection Startup panel by clicking
Startup . Click the “Make the selected
connection your default connection.”
option and click
OK.
Table A-1 Connection Manager Tasks