Network Computing Devices 300 - Manual (Page 28)

In Case of Trouble
3-2 NCD ThinSTAR 300 User’s Guide
The Network Panel Displays
If the terminal cannot determine the necessary network
addresses, the following Network panel displays when
you restart the terminal.
Fixing a Cable Problem
If the there is a problem with the terminal’s network cable
a different Network panel displays indicating that the
terminal may not be connected to the network.
First, check the network cable connection at the terminal
and at the outlet on the wall or hub. If the cable is not
secure, make sure it is plugged in and click
Restart . The
terminal should restart normally.
Figure 3-1 No Network Error panel