beautypg.com

Installing an mda – Nortel Networks Media Dependent Adapters 302403-G User Manual

Page 26

background image

24

Table 11

describes the 450-1GBIC MDA front-panel

components.

Installing an MDA

Before you begin installing an MDA, see

“MDA descriptions”

on page 4

for specific information about your MDA.

Table 11 450-1GBIC MDA description

Item

Label

Description

1

Link

Communication link LEDs (green):

On: Valid communications link.

Off: The communications link connection is
bad or there is no connection to this port.

Blinking: The corresponding port is
management disabled.

2

Phy

Phy status LEDs (green):

On: The corresponding Phy port is active.

Off: The corresponding Phy port is in backup
mode or there is no connection to this port.

3

Activity

Port activity LEDs (green):

Blinking: Indicates network activity level for
the corresponding port. A high level of
network activity can cause LEDs to appear to
be on continuously.

4

GBIC Host port (see

“MDA descriptions” on

page 4

).