Nortel Networks Media Dependent Adapters 302403-G - Manual (Page 11)

9
100BASE-FX MDAs
The 100BASE-FX MDAs conform to the IEEE 802.3u
100BASE-FX standard and can attach fiber-based 100 Mb/s
connections to Fast Ethernet devices. The 100BASE-FX MDAs
do not support single-mode fiber cable. The following are the
100BASE-FX MDAs.
• 400-2FX MDA (dual-port), page 10
• 400-4FX MDA (quad-port), page 13
• 8100-2FX MDA (dual-port), page 10
• 8100-4FX MDA (quad-port), page 13
• BPS2000-2FX MDA (dual-port), page 12
• BPS2000-4FX MDA (quad-port), page 15
For a complete list of MDAs, see Table 1 on page 4 . For
installation instructions, see “Installing an MDA” on page 24 .
Dual-port 100BASE-FX MDAs
The dual-port 100BASE-FX MDAs use two longwave 1300 nm
SC connectors to attach devices over 62.5/125 micron multimode
fiber optic cable.
Off: No traffic to this port.
3 10BASE-T/100BASE-TX RJ-45
(8-pin modular) port connectors.
Table 3 BPS2000-4TX MDA description (continued)
Item Label Description