Floppy options submenu – NEC SP B-Series User Manual
Page 32

2-10 Utilities
T
Ultra DMA
This option sets the Ultra DMA Mode for the hard drive. This option
cannot be changed when “Auto” is selected. The options include:
Mode 0
Mode 1
Mode 2
Disabled.
To return to the Advanced Menu, press
Esc
.
Floppy Options Submenu
This submenu can be used to configure your system’s diskette drives. To enter
the submenu, highlight the Floppy Options field, then press
Enter
. Select
Floppy Disk Controller, Diskette A:, and Floppy Write Protect options.
T
Floppy Disk Controller
This option configures the system’s diskette drive controller. Select
“Enabled” (default) or “Disabled.”
T
Diskette A:
These fields specify the capacity and physical size of Diskette Drive A.
To change these, highlight the field for the drive, press
Enter
and select
from the following options:
Disabled
360KB, 5.25 inch
1.2MB, 5.25 inch
720KB, 3.5 inch
1.44/1.25 MB, 3.5 inch (default)
2.88 MB, 3.5 inch.
T
Floppy Write Protect
This option enables or disables write protection for the diskette drive(s).
Choose the desired setting to enable or disable this option.
To return to the Advanced Menu, press
Esc
.