Nortel Networks Meridian M3902 - Manual (Page 66)

66
Additional Call Features
3. Dial the charge account number.
You receive dial tone.
4. Dial the number of the person you
want to add to the conference.
or
5. Press the Swap Key to switch between
talking with the original caller and the
new caller. Press the
Connect Key to
complete the conference.
Override Feature
You can Override a busy signal and interrupt another call. Note: This feature is
called Executive Busy Override on the Meridian SL-100.
To override a busy/engaged signal:
1. Dial a telephone number and receive
a busy signal.
or
2. Press the Override Key.
On the Meridian SL-100, press the
Executive Busy Override Key, or enter
the Executive Busy Override FAC.
The people on the call in progress
receive a tone for approximately one
second; the feature connects the three
of you together. A short tone repeats
every sixteen seconds.
To end the connection:
/
Press the Goodbye Key.
To disconnect the third party from the
called party on the Meridian SL-100:
Press the Executive Busy Override
Key, or enter the Executive Busy
Override FAC again.
Swap Connect
Override
ExeBusyOvd
Goodbye
ExeBusyOvd