Nortel Networks Meridian M3902 - Manual (Page 28)

28
Make a call
Use Speed Call (M3902)
The Speed Call feature allows you to automatically dial frequently called numbers
by entering a one, two, or three digit access code. Contact your network
administrator to determine the capacity of your Speed Call list. This will establish
the number of digits you will enter for each access code.
A telephone designated as a Speed Call Controller can program or edit the Speed
Call list. This feature must be enabled by your network administrator.
To store or change a Speed Call
number:
1. Press the Speed Call Controller Key.
The triangular icon flashes, indicating
programming mode.
2. The phone prompts you to dial a one,
two, or three digit code and the
telephone number.
Note: Dial the access code (if required)
followed by the internal, external, or
long-distance telephone number.
3. Press the Speed Call Controller Key
again.
The code and number are saved. The
flashing icon turns off.
To make a Speed Call:
1. Lift the handset .
or
2. Press the Speed Call Controller key or
the Speed Call User Key.
3. Dial the Speed Call code assigned to
the telephone number.
The number is automatically dialed.
SpcCtlr
SpcCtlr
SpcCtlr SpcUser