Use call transfer – Nortel Networks Meridian M3902 User Manual

Page 131

131

M3901 Feature Operation

To make a Speed Call:

1. Lift the

handset

2. Press the

Features

Key.

3. Press the

Dial Pad Number

Key for the

Speed Call Controller feature or the
Speed Call User feature.

Dial

the Speed Call code

of the

number you want to call.

The Speed Call feature automatically
dials the number.

Use Call Transfer

Use the Transfer feature to redirect a call to a third party.

To use the Transfer feature:

1. Press the

Hold

Key to put the active

call on hold.

Note:

The previous step is not required if

the Automatic Hold feature is active.

2. Press the

Features

Key.

3. Press the

Dial Pad Number

Key for the

Transfer feature.

Dial

the number where you want to

transfer the call.

5. Press the

Features

Key when you hear

ringing tone.

6. Press the

Dial Pad Number

Key for the

Transfer feature.

Note:

On the Meridian SL-100 use steps

one to three then hang up. If you continue,
a three way conversation is established.

Feature

Hold

Feature

This manual is related to the following products:

Meridian M3901 Meridian M3903 Meridian M3904